If you have e3.0 or higher, please follow the instructions below:

1)   Go to Setup > Calibrate Screen… menu

2)   Measure the width and the height of the “Calibration Screen” dialog box with a ruler

3)   Input the values in the Width and Height value boxes, respectively

4)   Click on the “OK” button

Note: the grid is adjusted accordingly.

If you have an e2.0 or earlier version, please follow the instructions below:

1)   Go to Special > Hardware Setup… menu

2)   In the Hardware Setup dialog box, select “Display Monitor” in Type dropdown list

3)   Click on the “Values” button

4)   Measure the width and the height of the “Screen Calibration” dialog box with a ruler

5)   Input the values in the Width and Height value boxes

6)   Click on the “OK” button

7)   Click on the “Close” button in the “Hardware Setup” dialog box

Note: the grid is adjusted accordingly.