The first color change is missing on my Machine

The first color change is missing on my Machine

Symptom:

If you find that the first color of a design is missing when stitching the design on a Barudan machine, it is because your Barudan machine requires a color change function code at the beginning of the design stitch data. The following procedure is needed to add a colour change function code at the beginning of the design stitch data automatically, thus avoiding such issue.

Solution:

This solution works when the Machine Format setting is the Barudan related Machine Format, such as, “Barudan Z Series” or “Barudan”, etc..

1)   Go to Design > Machine Format Settings… menu

2)   In the Standard tab, tick the checkbox for “First CC required”

3)   Click on the OK button

Note: a color change function code will now always be added at the beginning of the design stitch data in the Barudan related Machine Format.

    • Related Articles

    • Machine Connections

      Machine Connections can be handled in a number of ways: If your embroidery machine comes with machine connection software, such as, Ricoma PC Communication Software (EMB_soft.exe) for Ricoma embroidery machine, or “Happy Link” software for Happy ...

    • Connection Manager

      Do you work with a Barudan, Brother, Happy or RiCOMA embroidery machine? Connection Manager allows for smoother workflows when sending designs to your machine. EmbroideryStudio Connection Manager Connection Manager: Let's you set up connections for ...

    • How to install EmbroideryStudio 2025

      1.) Download the EmbroideryStudio 2025 installer from here: https://d22gwtm2zg7h7n.cloudfront.net/EmbroideryStudio2025/27.0.79.24293/EmbroideryStudio2025_27.0.79.24293_Setup.exe 2.) Run the installer. Click Next at the first screen. 3.) Accept the ...